Vestil CH series User Manual

INSTRUCTION MANUAL OVERHEAD COIL HOOKS MODEL CH (10-6, 10-12, & 20-8) MODEL NO. ________________________ SERIAL NO. _________________

Lower the load to the ground/supporting surface (photos 10 and 11). Make sure that the hook is motionless before beginning to lower it. Slowly lower

Maintenance and Inspections: A designated person must verify that the device complies with all regulations, codes, and standards that apply to “Under-

normal operating condition, such as tightening loose fasteners, or removing debris from the surface of the hook. A modification is a change that alte

We produce several models of overhead coil hook so that our customers may select a product that satisfies specific requirements. The product conform

- 3 -TABLE OF CONTENTS Safety Principles 2 Product Introduction 4 Safety Guidelines 5 Use Instructions 7-10 Mainten

PRODUCT INTRODUCTION Thank you for purchasing an Overhead Coil Hook (“coil hook” or simply “the hook”) made by V

SAFETY GUIDELINES Read the entire manual before attaching the coil hook to a lifting device or using it for the first time. Refer to the manual for

FIG. 1: Exploded Parts Diagram Connection opening 2 1 3 4 5 Item No. Part No. Description Quantity 1 1 1 49-014-016 49-014-017 49-014-018 Mai

Use Instructions: The operating instructions in this manual are meant to supplement the operating recommendations of the ASME standard B30.20. Onl

Step 4: Move the coil hook into position above the load. Lower the hook and adjust the location so that the bracket weldment passes through the cen

34 Step 7: Move the load to the desired location. Refer to the “Warning” messages and the included lifting rules on p. 8. Grasp the handle and ac