Vestil Stand-V User Manual download pdf

STAND-V & STAND-V-HP ROLLER STANDS: ASSEMBLY INSTRUCTIONS

Step 1: Place the base (1) upright on the ground as

shown in the exploded assembly diagram at left.

Step 2 Connect the outer sleeve (2) to the base

Insert the sleeve (2) into the central opening of the

base (see Exploded Assembly Diagram). Loosen the

sleeve retaining bolt, if necessary, to ensure that the

sleeve firmly contacts the lip at the bottom of the

central opening. Secure the sleeve to the base by

tightening the retaining bolt.

Step 3 Install the height adjustment tube (4): Referring

to Fig. 1 below, loosen the clamp on the outer sleeve

(2) by turning the clamp bolt (3) counterclockwise;

then slide the tube (4) into the outer sleeve (2). Hold

the tube at the desired height while tightening the

clamp by turning the clamp bolt clockwise.

Step 4 Attach the roller head (5-10) to the top of the

height adjustment tube: Referring to Fig. 2, slide the

roller head onto the top end of the height adjustment

tube. It might be necessary to loosen the roller head

retaining bolt. Secure the roller head to the tube by

tightening the retaining screw.

Step 5 Adjust the height of the roller head: Stand-V

model roller stands require manual height adjustment:

a. Loosen the clamp bolt (3); then

b. Adjust the height of the roller as desired; then

c. tighten the clamp bolt.

Exploded Assembly Diagram

This bolt

secures the

roller head

to the

height

adjustment

tube

clamp

Sleeve retaining

bolt

Fig. 2: Complete assembly Fig. 1: Insertion of height

adjustment tube

Item

No.

Description Quantity

1 Base 1

2 Outer sleeve 1

3 M10 x 30 clamp bolt 1

4 Height adjustment tube 1

*5 M10 x 15 bolt 3

*6 Roller bracket 1

*7 Outer roller shaft 2

*8 Bearing 4

*9 Roller 2

*10 Inner roller shaft 2

*Item no.’s 5-10 together comprise the “roller

head”.

Max. rated load (capacity) = 1,760lbs (800kg)

Net weight (fully assembled) = 30lbs (~14kg)

Roller height range:

Stand-V = 23in. – 38in.

Stand-V-HP = 27in. – 42in.

Roller

head

retaining

bolt

Clamp

(3)

Clamp

bolt

Sleeve

retaining

bolt

Summary of Contents

Page 1

STAND-V & STAND-V-HP ROLLER STANDS: ASSEMBLY INSTRUCTIONS Step 1: Place the base (1) upright on the ground as shown in the exploded assembl

Comments to this Manuals

No comments

Vestil Stand-V User Manual

Browse online or download User Manual for Equipment Vestil Stand-V. Vestil Stand-V User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Vestil Stand-V