Vestil WP-3636 Instruction Manual download pdf (Page 11)

03/10/03 rev. 3/5/2014 WP manual, operation instructions.doc

11 of 16

To order replacement parts:

Vestil uses only quality parts to make the equipment we manufacture. Vestil bears no responsibility for problems that

result as a consequence of using unapproved replacement parts. To order replacement or spare parts for this

equipment, contact the factory.

Step 3: Raise the front guard rail.

Pivot the rail assembly

toward the front of the

platform.

Secure the assembly in place

with the pegs and slots.

Step 4: Close and latch the gates.

Lift the gate to allow the peg welded to the free

end can fit into the corresponding locking slot

welded onto the mast guard.

Step 5: Secure the platform to the tines of the fork lift.

The nylon strap is an essential safety-

enhancing feature designed to connect the work platform to

the carriage of a fork lift. Improperly connecting the nylon

safety strap to either the platform or the fork lift might

eliminate the safety benefit.

a.) Drive the fork lift tines into the fork pockets on the underside

of the platform; then secure the platform to the fork lift with the

tine lock (see Step 1 and FIG. 5A & 5B on p. 9).

b.) As delivered to you--the end-user--the strap is connected to

the base of the mast guard (see “Safety strap connection

diagram” on p. 9).

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

No comments

Vestil WP-3636 Instruction Manual Page 11