Vestil SCALE-S User Manual

LP7510 Weighing Indicator User’s Manual Edition:01-081008 Locosc Precision Load Cell Controller

10 S1: weight status, ST=standstill, US= not standstill, OL= overload S2: weight mode,

11 4.functions include output port and info. As bellows: Function pack Output port Port

125. I/O card port is on I/O BD9 type joint of weighing display. The pin Definition and

134 Instruction 4．1 Display and main key Instruction： When the light of status is on, t

14 Press 5s to enter into and leave totalizing-scale operation Press 1s to totalize a wei

15connect the battery line for rechargeable battery. Before switch on the indicator. the

16is on. Press UNIT key. it change to lb. and lb light on. After 4s back to kg automatica

17“SUON” show on the indicator. The light is on at same time. 2. when adding the weight

181. sampling and then get the average unit weight.: If you don’t know the unit weight.

19If you want the weight, Press . It will show on the indicator. The weight status light

2 Preface Thanks for using LP7510 Weighing indicator, ALL products are

20And weight & “PCS” status light on. 4s latter automatically show quantity 4.4 In

21can have the overload or under load alarming function. As follows Menu Optional funct

224). Finish the setting. Press . Than back to weighing status If the actual weight is 2

23C20=90.00t，C21=89.50t； C22=12.00t，C23=12.50t； In application: When the actual weight =9

24 Menu Option function Parameter setting C27 Communication mode C27=0 means shut off

25to function menu. Adjust to C27. press for confirm. And set “C27 2” press again. 2

265. Error resolution and daily maintenance Error code list Error code Reason Resolution

27Daily maintenance 1. Regularly clean the panel and body with soft cotton sheets and cle

286. Packing list LP7510 display controller packing list Item No. Name Model No. UNIT

3LIST 1 Safety instructions----------------------------------------------------- 4

41 Safety instruction and notice for battery use safety instruction For safety op

5 Battery use instruction The Company provided for the maintenance-free and rechargeabl

6 4. when replace the battery. The correct connection is : connect the red line to the

73 Installation and connection 3.1 Installation method There are 3 installation method f

8Built-in rechargeable connection method: Open the back cover of the weighing display

94. Serial communication interface at the back of the display controller marked the RS232