INSTRUCTION MANUAL BEAM CLAMP MODEL BC (2, 4, 6 & 8) MODEL NO. ________________________ SERIAL NO. ________________________ VESTIL
Photos 11 and 12). DO NOT disconnect the clamp from the beam until you appropriately immobilize the beam to prevent it from rolling, falling over, or
Maintenance and Inspections: A designated person must verify that the clamp complies with all regulations, codes, and standards that apply to “Under-t
The reader should understand the significant difference between “Adjustments” and “Repairs,” and “Modifications”. ¾ An adjustment or repair refers
We produce several models of beam clamp so that our customers may select a product that satisfies specific requirements. Each unit conforms to the
- 3 -TABLE OF CONTENTS Safety Principles 2 Product Introduction 4 Safety Guidelines 5 Use Instructions 7-10 Mainten
PRODUCT INTRODUCTION Thank you for purchasing a Beam Clamp (“beam clamp” or simply “clamp”) made by Vestil Man
SAFETY GUIDELINES Read the entire manual before you use the clamp for the first time and before each subsequent use. Refer to the manual for safe us
Labeled Photographs **Note: Vestil does NOT provide replacement parts for this product. The following diagram is solely intended to clarify te
Use Instructions: The operating instructions in this manual are meant to supplement the operation recommendations of ASME standard B30.20. Only tr
Step 4: Engage the beam with the tongs. Turn the handle clockwise until the clamp firmly grasps the beam. Each clamping arm is formed to include an
Step 6: Lift the beam. To raise the beam, steady the clamp and load by grasping [one of] the hoist hook[s]. The photographs demonstrate the procedu
Comments to this Manuals